Product Descriptions and Specifications

Mobile Home Roofing Previous page

RoofWrap Sealant

RoofWrap Sealant is a one-part, black or white, elastomeric sealant and adhesive designed for sealing the exposed/cut edges of field fabricated rubber membrane splices/laps, adhering roof mounted flashings and general purpose sealing needs.

Basic Uses

RoofWrap Sealant is required for sealing EPDM seams and flashings against the effects of weathering. Refer to the RoofWrap Installation Guide for appropriate use of Roofwrap Sealant when seams and flashings are completed with RoofWrap Tape Products.

Product Benefits

Typical Physical Properties

Liquid properties at 77f*

Base Polymer Polyether
Color Black, gray and white
Solids, % 100%
Solvents None
Flash point N/A

*Typical Values: Based on material tested in our laboratories but variable from sample to sample. Typical values should not be construed as a guaranteed analysis of any specific lot or as specification items.

Product Packaging

11 oz Cartridges.

Estimated Coverage and Application

Coverage at 77F, Theoretical: 20 Linear ft/cartridge
Application Temperature: 30F to 100F
Service Temperature: -60F to 180F

Application Instructions

Remove all dust or other foreign material surfaces to be bonded. Clean the membrane thoroughly before application of RoofWrap Sealant. Bring sealant to room temperature prior to use at temperatures below 50F. Do not apply at temperatures below 30F. Apply a 1/4" to 3/8" bead of sealant along the edge to be sealed.

Technical Services

Contact RoofWrap at (206) 550 7336 for technical service information.


The statements provided concerning the material shown are intended as a guide for material usage and are believed to be true and accurate. No statement made by anyone may supersede this information, except when done in writing by RoofWrap. Since the manner of use is beyond our control, RoofWrap does not make nor does it authorize anyone to make any warranty of merchantability or fitness for any purpose or any other warranty, guarantee or representation, expressed or implied, concerning this material except that it conforms to RoofWraps physical properties. Buyer and user accept the product under these conditions and assume the risk of any failure, any injury of person or property (including that of the user), loss or liability resulting from the handling, storage or use of the product whether or not it is handled, stored or used in accordance with the directions or specifications. RoofWrap must be notified in writing of any claims and be given the opportunity to inspect the complaint or failure before repairs are made.

Previous Page