Product Descriptions and Specifications

Mobile Home Roofing Previous page

Retrofit Pipe Boot

RoofWrap Retrofit Pipe Boot is two part, nylon resin curb that can be placed around pipes, conduit or wires that cannot easily be disconnected. The curb is installed to the membrane with Roofwrap Sealant and filled with Roofwrap Pourable Sealer.

Basic Uses

The Retrofit Pipe Boot is used with the RoofWrap System to seal around weatherhead roof-mounted power poles or other similar pipes measuring 1" to 3" outside diameter.

Specifications

The Retrofit Boot comes in two parts that, once installed, fit together for placement around conduit. The curb has a serviceable temperature range of -60 F to +170 F and is resistant to ozone and ultraviolet exposure.

Technical Services

Contact RoofWrap at (206) 550 7336 for technical service information.

Disclaimer

The statements provided concerning the material shown are intended as a guide for material usage and are believed to be true and accurate. No statement made by anyone may supersede this information, except when done in writing by RoofWrap. Since the manner of use is beyond our control, RoofWrap does not make nor does it authorize anyone to make any warranty of merchantability or fitness for any purpose or any other warranty, guarantee or representation, expressed or implied, concerning this material except that it conforms to RoofWraps physical properties. Buyer and user accept the product under these conditions and assume the risk of any failure, any injury of person or property (including that of the user), loss or liability resulting from the handling, storage or use of the product whether or not it is handled, stored or used in accordance with the directions or specifications. RoofWrap must be notified in writing of any claims and be given the opportunity to inspect the complaint or failure before repairs are made.

Previous Page