Product Descriptions and Specifications

Mobile Home Roofing Previous page

Fan Vent Flashing Hood

RoofWrap Fan Vent Flashing Hoods are galvanized steel roof caps with side flashing flanges. They are available in a 5" and 7" diameter openings.

Basic Uses

RoofWrap Fan Hoods are used for weatherizing the kitchen exhaust roof conduit (5" model) and attic vents or bath exhaust roof conduit (7" model). Used with Caulk Tape, cleaner and Drill Point Screws.


RoofWrap Fan Hoods are manufactured from galvanized steel. The 5" model flange measures 10" square, is 4" tall from the roof level and has an average 6" long connection extension below the flange level. The total free vent area is 15 square inches. The 7" model measures 12 1/4" square at the flange, 10" tall from roof level and has a 3/4" long connection extension below the flange level. The total free vent area is 30 square inches.

Technical Services

Contact RoofWrap at (206) 550 7336 for technical service information.


The statements provided concerning the material shown are intended as a guide for material usage and are believed to be true and accurate. No statement made by anyone may supersede this information, except when done in writing by RoofWrap. Since the manner of use is beyond our control, RoofWrap does not make nor does it authorize anyone to make any warranty of merchantability or fitness for any purpose or any other warranty, guarantee or representation, expressed or implied, concerning this material except that it conforms to RoofWraps physical properties. Buyer and user accept the product under these conditions and assume the risk of any failure, any injury of person or property (including that of the user), loss or liability resulting from the handling, storage or use of the product whether or not it is handled, stored or used in accordance with the directions or specifications. RoofWrap must be notified in writing of any claims and be given the opportunity to inspect the complaint or failure before repairs are made.

Previous Page