Product Descriptions and Specifications

Mobile Home Roofing Previous page

Termination bar

RoofWrap Termination Bar is a specially extruded aluminum bar.

Basic Uses

RoofWrap Termination Bar is designed for use as an anchor bar for attachment and termination of RoofWrap EPDM membranes and flashings. Termination Bar common use is on the perimeter the edge wall for attachment. It can also be used for field roof attachment, on support curbs, roof deck angle changes and parapet walls as an anchor or termination bar. Refer to the current RoofWrap Installation Guide for complete instructions on use.


Material:Extruded Aluminum
Dimensions:.050" thick x 1" wide and 10" long per piece
Fastener Holes:1/4"x3/8" slotted holes on 6" centers

Technical Services

Contact RoofWrap at (206) 550 7336 for technical service information.


The statements provided concerning the material shown are intended as a guide for material usage and are believed to be true and accurate. No statement made by anyone may supersede this information, except when done in writing by RoofWrap. Since the manner of use is beyond our control, RoofWrap does not make nor does it authorize anyone to make any warranty of merchantability or fitness for any purpose or any other warranty, guarantee or representation, expressed or implied, concerning this material except that it conforms to RoofWraps physical properties. Buyer and user accept the product under these conditions and assume the risk of any failure, any injury of person or property (including that of the user), loss or liability resulting from the handling, storage or use of the product whether or not it is handled, stored or used in accordance with the directions or specifications. RoofWrap must be notified in writing of any claims and be given the opportunity to inspect the complaint or failure before repairs are made.

Previous Page