Product Descriptions and Specifications

Mobile Home Roofing Previous page

Cured Cover Tape

RoofWrap Cured EPDM Cover Tape was specifically developed for use with RoofWrap EPDM roofing systems. RoofWrap's Cured Cover Tape may be used in conjunction with the RoofWrap Tape Primer to seal certain installed metal flashings and details as well as membrane tears.

Basic Uses

RoofWrap Cured EPDM Cover Tape was specifically developed for use with RoofWrap EPDM roofing systems. RoofWrap's Cured Cover Tape may be used in conjunction with the RoofWrap Tape Primer to seal certain installed Termination Bars, metal flashings and details as well as membrane tears.

Product Benefits

Typical Physical Properties* (Butyl Tape)

Base Polymer:Butyl
Color:Black or White
Cure State:Cured
Tensile Strength:75 psi (55 psi min.)
Elongation:1000% (800% min.)
brittleness Tmeperature:Below -50 F
Permeability:0.6 perm-mils
Heat Aging at 300 F:No appearance change after 180 hours

* Typical Values: Based on material tested in our laboratories but variable from sample to sample. Typical values should not be construed as a guaranteed analysis of any specific lot or as specification items.

Application Instructions

Follow the instructions as outlined in the current RoofWrap Installation Guide.

Using supplied Scotch-Brite® scrub pads, clean the area of the membrane to receive the tape thoroughly with RoofWrap Tape Primer and allow to dry. Roll out the cover tape and center over the area to be covered. Starting at one end, peel back the release liner approximately 12". Carefully position the tape, center first. When working with two people sealing full length field seams, lift the cover tape and peel back the release liner approximately 10' at a time without stretching the tape. The second person should smooth the cover tape over the area to be covered. Then, using a 2" steel roller, roll the Cover Tape running the roller perpendicular to the length of the tape. Lap Sealant is only required at the cut ends of the tape and overlaps.

Technical Services

Contact RoofWrap at (206) 550 7336 for technical service information.

Disclaimer

The statements provided concerning the material shown are intended as a guide for material usage and are believed to be true and accurate. No statement made by anyone may supersede this information, except when done in writing by RoofWrap. Since the manner of use is beyond our control, RoofWrap does not make nor does it authorize anyone to make any warranty of merchantability or fitness for any purpose or any other warranty, guarantee or representation, expressed or implied, concerning this material except that it conforms to RoofWraps physical properties. Buyer and user accept the product under these conditions and assume the risk of any failure, any injury of person or property (including that of the user), loss or liability resulting from the handling, storage or use of the product whether or not it is handled, stored or used in accordance with the directions or specifications. RoofWrap must be notified in writing of any claims and be given the opportunity to inspect the complaint or failure before repairs are made.

Previous Page